Serger Magic: Elaborations Utilizing the Rolled Hem Stitch – Piping and Soutache
The rolled hem can be utilised to build piping that correctly matches your challenge. Seams Wonderful is a helpful idea for this task, considering the fact that it is lightweight, flexible, and cut on the bias. It applied to come in 1″ widths, but I have not found that width for a while. If you can discover it, use this width, doubled, and serge on the lengthwise fold. If you can only find the 5/8″ width, a double layer would be sturdier, with the rolled hem serging the two items together lengthwise. Or, use a 1″ or broader piece of bias lower fabric, folded in 50 percent lengthwise. Put attractive thread to match your task in the loopers and a matching or neutral colored serger thread in your needle. If the ornamental thread is rather wonderful, this kind of as Wooly Nylon or embroidery thread, the similar thread could be used in the needle for a ideal match. Quick matching piping!
As with common corded piping, the seam allowance on this piping can be trimmed evenly right after serging, but if serged very carefully, this is not usually needed. You can also twine this piping for a additional extraordinary impact by functioning a small twine within the fold of fabric. To produce extend piping for knit tasks, sew together the edge of 1″ very clear elastic or a strip of tricot. For a heavier piping, use an overlock stitch with a brief stitch length.
Serger chains can also be made use of as a type of narrow soutache. Variations on the serger chain arrive from filling the rolled hem stitch with a different thread or ribbon. Feed a heavier decorative wire, this kind of as Pear Crown Rayon, crochet cord, 1/8 inch vast ribbon, or even a thing as heavy as rattail cord, under the foot to the right of in which the appropriate needle arrives down. Most multi-function serger toes have a groove to maintain the ribbon in put as it feeds by the stitching spot. Serge, guiding this thread or ribbon with your correct hand, whilst retaining a regular pressure with your remaining hand on the filler thread in back again of the presser foot. For a stretchy soutache-like braid, serge a rolled hem alongside the apparent elastic, then trim absent the excessive, leaving a stretchy wire, which can be couched to a project.
A wonderful trick with the covered serged cord is to lessen the decreased looper stress, producing additional of a slim hem somewhat than a rolled hem (stress location C on some Infant Locks), or even to serge with a satin stitch size overlock stitch, and use fusible thread in the lower looper. The trim can be fused to the project ahead of becoming couched down with a stitching equipment.
The rolled hem sew performs several distinct duties from safe edges, to sensitive seams, to stunning embellishments. When mixed with many threads and fabrics, the variety of probable gildings to be established with the rolled hem stitch is minimal only by your imagination and willingness to experiment.